Welcome to Jiangsu Hengdali Steel Industry Co., Ltd.
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
Thickness: 0.15-150mm
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
Thickness: 0.15-150mm
Port of Destination: Any port you like
Aluminium Sheets with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.
Because of its good energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
5083 belongs to Al-Mg-Si alloy, which is widely used, especially in the construction industry.
It is the most promising alloy. Good corrosion resistance, good weldability, good cold processing, and has moderate strength.
The main alloy element of 5083 is magnesium, which has good forming performance, corrosion resistance, weldability and medium strength.
Al metal alloy: 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000 series etc
Alu temper: O - H112, T3 - T8, T351 - T851 etc
Thickness: 0.3mm - 6mm
Width: 900mm - 1600mm
6082-T6 aluminum, the main alloying elements in the alloy are magnesium and silicon, with excellent processing performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, coating, excellent anodic oxidation effect, is a typical extrusion alloy.
Widely used in building profiles, irrigation pipes, pipes, bars and profiles for vehicles, platforms, furniture, elevators and fences.
2036 aluminum this is an early application of a kind of hard aluminum, commonly known as standard hard aluminum, with moderate strength, annealing, quenching and hot state plasticity is good, heat treatment can be strengthened, quenching and natural aging state in use, spot welding weldability is good.
2036 aluminum alloy features: high strength, a certain heat resistance, can be used for working parts below 150℃.
The strength of 2036 alloy is higher than that of 7075 alloy.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding.
Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts.
1100 aluminum alloy is 99.0% ordinary industrial pure aluminum.
Heat treatment can not be strengthened; Low strength, but good ductility, formability, weldability and corrosion resistance;
After anodic oxidation, the corrosion resistance can be further improved and a beautiful surface can be obtained.
CONTACT US
Tel : +8618915372544
E-mail : info@hengdalisteel.com
WhatApp :+8618915372544
GET A FREE QUOTE
Copyright : Jiangsu Hengdali Steel Industry Co., Ltd. Powerby : hengdali
This site is protected by reCAPTCHA and the GooglePrivacy Policy andTerms of Service apply.
